Boring Bar Tool Holders
The high precision head of this Boring Bar Tool Holder is designed and ruggedly built for heavy cuts and accurate bore sizing for large volume production runs. Slater Tools' Boring Bar Tool Holders use industry standard boring bars, reducing the need for special tooling. Tool bores are ground concentric with the shank and can be used for trepanning. The double hole is designed to accommodate a larger range of bore sizes. All moving parts on this tool holder are hardened and ground.
Call: (586) 465-5000 / Email: direct@slatertools.com
SINGLE HOLE BORING HEADS
| Shank Dia. B | Tool Bore A | C | D | E | F | Max Adj. | Part # |
|---|---|---|---|---|---|---|---|
| 3/4 | 5/8 | 3/4 | 1 3/4 | 7/8 | 2 | 5/16 | BBH-0130 |
| 1 | 5/8 | 3/4 | 1 3/4 | 7/8 | 2 | 5/16 | BBH-0135 |
| 1 1/4 | 3/4 | 1 | 2 1/2 | 1 1/8 | 2 1/2 | 1/2 | BBH-0140 |
| 1 3/4 | 1 | 1 1/8 | 2 3/4 | 1 1/4 | 3 | 5/8 | BBH-0150 |
| 2 | 1 1/8 | 1 1/2 | 3 | 1 1/2 | 3 1/2 | 3/4 | BBH-0160 |
| 2 1/2 | 1 1/4 | 1 3/4 | 3 1/2 | 1 3/4 | 4 | 7/8 | BBH-0170 |
DOUBLE HOLE BORING HEADS
| Shank Dia. B | Tool Bore A | C | D | E | F | G | H | Max Adj. | Part # |
|---|---|---|---|---|---|---|---|---|---|
| 3/4 | 5/8 | 3/4 | 1 3/4 | 7/8 | 2 | 9/16 | 1/4 | 5/16 | BBH-0230 |
| 1 | 5/8 | 3/4 | 1 3/4 | 7/8 | 2 | 9/16 | 1/4 | 5/16 | BBH-0235 |
| 1 1/4 | 3/4 | 1 | 2 1/2 | 1 1/8 | 2 1/2 | 5/8 | 3/8 | 1/2 | BBH-0240 |
| 1 3/4 | 1 | 1 1/8 | 2 3/4 | 1 1/4 | 3 | 3/4 | 1/2 | 5/8 | BBH-0250 |
| 2 | 1 1/8 | 1 1/2 | 3 | 1 1/2 | 3 1/2 | 13/16 | 5/8 | 3/4 | BBH-0260 |
| 2 1/2 | 1 1/4 | 1 3/4 | 3 1/2 | 1 3/4 | 4 | 1 | 11/16 | 7/8 | BBH-0270 |
- Adustable Head
- Ruggedly built for the heaviest cuts
- High-precision head designed for accurate pre-set tooling and production work
- Boring and facing heads
- Hole ground concentric with shank may be used for trepanning
ORDER DIRECT
- Upload Purchase Order Here
- Call: (586) 465-5000
- Fax: (586) 465-3030